MONEL TUBE

 

Monel Tube
 

Monel Tube Manufacturers Supplier Stockist and Exporter
We stock large quantities of the Monel Tube in both seamless & welded at all time in our stock house. We supply the material to all big and small parties at any time they need. We export the Monel Tube to all parts of the world. Our wide network and very good contact with supply chain managers enable us to deliver our products at any part of the globe. We provide a wide range of dimensions for the Monel Tube and pipes so that they can fit to any size and shapes.

We ensure that the clients get the best product at the cheapest cost from us. We make sure that the order is delivered at the right time in the right place. We have built trust over the years for our best quality services and always look forward to build ling term business relationship with our clients. We are committed to quality and service.We are leading Monel Tube suppliers in the industry. We Monel Tube to all parts of the world. Our Monel Tube are fabricated from the high quality raw materials. Hence they are very much durable.

FEATURES :

  • High strength
  • High resistance to pitting, crevice corrosion resistance
  • High resistance to stress corrosion cracking, corrosion fatigue and erosion
  • Good sulfide stress corrosion resistance
  • Low thermal expansion and higher heat conductivity than austenitic steels
  • Good workability and weldability.
  • High energy absorption
  • Excellent finish
  • Durable

SPECIFICATIONS :

Grades:ASTM B163, B165
ASME SB163, SB165
NACE MR0175
Size:15mm NB to 150mm NB (1/2” to 6”), 7″ (193.7mm OD to 20″ 508mm OD)
FormRound, Square, Rectangular, Coil, U Tube,
LengthAs per customer’s requirement (Maximum upto 7 meters)
EndPlain End, Bevelled End
TypeSeamless / ERW / Welded
SurfaceBlack painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE
TestChemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact
Test etc), Exterior Size Inspection
OD Range1.250″ – 6.000″ (30-150mm)
Wall Range0.095″ – 1.000″ (.2.5-25mm)
Mill Test CertificateEN 10204/3.1B
Additional TestingNACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc.

CHEMCIAL ANALYSIS :

Material / Purity:Alloy 400Alloy K-500
Ni66.566.5
Fe2.502.0
Mn2.01.50
Si.500.5
Cu31.0
Al2.7
S.024.010
Ti0.5
Cu30.0

TECHNICAL DATA :

NI117100Monel® alloy 400 Tube,
Outside Diameter:0.6mm, Wall Thickness:0.1mm, Inside Diameter:0.4mm, Temper:As drawn
NI117105Monel® alloy 400 Tube,
Outside Diameter:0.5mm, Wall Thickness:0.146mm, Inside Diameter:0.208mm, Temper:As drawn
NI117150Monel® alloy 400 Tube,
Outside Diameter:0.8mm, Wall Thickness:0.1mm, Inside Diameter:0.6mm, Temper:As drawn
NI117200Monel® alloy 400 Tube,
Outside Diameter:1.27mm, Wall Thickness:0.25mm, Inside Diameter:0.77mm, Temper:As drawn
 
NI117250Monel® alloy 400 Tube,
Outside Diameter:1.5mm, Wall Thickness:0.25mm, Inside Diameter:1mm, Temper:As drawn
NI117300Monel® alloy 400 Tube,
Outside Diameter:1.9mm, Wall Thickness:0.275mm, Inside Diameter:1.35mm, Temper:As drawn
NI117320Monel® alloy 400 Tube,
Outside Diameter:2.0mm, Wall Thickness:0.175mm, Inside Diameter:1.65mm, Temper:As drawn
NI117350Monel® alloy 400 Tube,
Outside Diameter:2.2mm, Wall Thickness:0.35mm, Inside Diameter:1.5mm, Temper:As drawn
NI117400Monel® alloy 400 Tube,
Outside Diameter:2.5mm, Wall Thickness:0.18mm, Inside Diameter:2.14mm, Temper:As drawn
 
NI117410Monel® alloy 400 Tube,
Outside Diameter:2.57mm, Wall Thickness:0.15mm, Inside Diameter:2.27mm, Temper:As drawn
NI117450Monel® alloy 400 Tube,
Outside Diameter:2.8mm, Wall Thickness:0.35mm, Inside Diameter:2.1mm, Temper:As drawn
NI117500Monel® alloy 400 Tube,
Outside Diameter:3.175mm, Wall Thickness:0.2mm, Inside Diameter:2.775mm, Temper:As drawn
NI117600Monel® alloy 400 Tube,
Outside Diameter:6.35mm, Wall Thickness:1.5mm, Inside Diameter:3.35mm, Temper:As drawn
NI117620Monel® alloy 400 Tube,
Outside Diameter:7.1mm, Wall Thickness:0.27mm, Inside Diameter:6.56mm, Temper:Hard
 
NI117700Monel® alloy 400 Tube,
Outside Diameter:19.0mm, Wall Thickness:1.22mm, Inside Diameter:16.56mm, Temper:As drawn
NI117800Monel® alloy 400 Tube,
Outside Diameter:42.2mm, Wall Thickness:2.77mm, Inside Diameter:36.66mm

PHYSICAL PROPERTY:

PropertyMetricImperial
Density8.8 g/cm30.318lb/in3
Melting point1350°C2460°F
Co-Efficient of Expansion13.9µm/m.°C
(20-100°C)
7.7×10-6 in/in.°F
(70-212°F)
Modulus of rigidity65.3 kN/mm29471 ksi
Modulus of elasticity105-120 kN/mm215230-17405 ksi

APPLICATIONS :

  • Use in Heat Exchangers
  • Use in Instrumentation
  • Use in Hydraulic & Pneumatic system
  • Use in Nuclear Power Plants
  • Use in Automotive industries
  • Use in Aerospace
  • Use in Medical
  • Use in Pharmaceutical
  • Use in Oil coolers
  • Use in Economizers
  • Use in Condenser
  • Use in LNGs
  • Use in Pulp and paper
  • Use in Offshore construction

We have long experience in the business of manufacturers of Monel Tubes. We have established state of the art manufacturing facilities and have the best technology available for the manufacturing process along with the best technical staff. Our raw materials are selected and purchased after a vigorous quality control check has been done by our research team. So having all these factors on our sides we ensure that all our clients whether small business owners or big parties should get the best possible deal from us. We strive to build excellent professional relationship with all our clients. Our objective is to provide excellent services to our clients. We understand that for our vision of growth we have to deliver the best quality Tubing Products and services consistently. Our constant endeavor is to excel in all the aspects of manufacturing, packaging, shipment and export of the Monel Tube.